| Sl. No. |
Project Title |
| Design and Development |
|---|
| 1 |
Design and Development of Semi-Active Suspension |
| 2 |
Design and Development of MR Mounts for Machinery |
| 3 |
Design and Fabricating of Fixture for Transducer Spool Arrays |
| 4 | Design Improvement & Standardization of Belt Conveyors & Belt Feeders |
| 5 |
Design of Hydraulic Actuator Mechanism for Underwater
Application |
| 6 |
Generic Design Tool for Winch System |
| 7 |
Development of Metal Deposition Based Refurbishment
Technologies for Kaveri Engine Components |
| 8 |
Design of Hydraulic Assisting Platform for Tilting a
Container |
| 9 |
Design and fabricating of fixture for ASW consoles |
| 10 |
Automotive Torque Converter Design Code |
| 11 |
Development and Validation of Design Scheme for Magnetorheological fluid (MR) anti-vibration mount |
| 12 |
Case Study Development of Semi-Active Suspension for Vehicle (SUV) |
| Structural Analysis |
| 1 |
Finite Element Analysis & Optimization of Opto-Mechanical
Sensor |
| 2 |
Bird Hit Analysis of Bullet Nose of Kaveri (K10) Engine |
| 3 |
Design Optimization of Turret Lathe Bed |
| 4 |
Shock Response Analysis of 5 level cabinet |
| 5 |
Shock Response Analysis for Transducer Spool Assembly |
| 6 |
Shock Analysis for Transducer spool Assembly |
| 7 |
Seismic Analysis of a Battery Charger |
| 8 |
Fatigue Analysis of a Rail Wheel |
| 9 |
Rotor Dynamic Analysis and Static & Dynamic Analysis of
Turbocharger Rotor |
| 10 |
Studies on Surface engineering of nickel super alloy based
specimens for thin film sensors |
| 11 |
Study of Structural Rigidity of Tank |
| 12 |
Frontal-offset Crash of a Dodge Neon Car |
| 13 |
Calculation of Forces on a Gate |
| 14 |
Non-linear Static Analysis of Diesel Injector Assembly |
| 15 |
Linear Static Analysis & Optimization of Vacuum Chamber |
| 16 |
Non-linear Transient Analysis of Carrier Plate |
| 17 |
Linear Static Analysis of Piping Support |
| 18 |
Ballooning Effect of Torque converter |
| 19 |
Structural Analysis of a Dunk Body |
| 20 |
Structural Analysis for RFP Cabinet & Consoles |
| 21 |
Structural Analysis of Flight Level Radar Container |
| 22 |
Structural Analysis of Fire Control System |
| 23 |
Structural Analysis of Plastic vessel for water purifier |
| 24 |
Finite Element Analysis of Automobile Seating System |
| 25 |
Finite Element Analysis of a Gear box |
| 26 |
Finite Element Analysis of Exhaust Casing of a Steam Turbine |
| 27 |
Finite Element Analysis of a Space Craft Structure |
| 28 |
Finite Element Analysis of an Airborne Winch System |
| 29 |
Finite Element Analysis of a Variable Mach Number Wind
Tunnel |
| 30 |
Finite Element Analysis of Rear Fender Extension |
| 31 |
Finite Element Analysis of an Automotive Piston |
| 32 |
Finite Element Analysis of a Radar Component |
| 33 |
Finite Element Analysis of a Truck Trailer vibration
Isolator System |
| 34 |
Finite Element Analysis of a Vacuum Chamber |
| 35 |
Finite Element Analysis and Redesign of a Bus Passenger Seat |
| 36 |
Finite Element Analysis of Exhaust Casing of 525 mm (multi
stage) Turbine |
| 37 |
Finite Element Analysis of an Exhaust Cone Strut Assembly |
| 38 |
Finite Element Analysis of Automotive Components |
| 39 |
Finite Element Modeling and Fatigue Analysis of a Tractor
Seat |
| 40 |
Finite Element Analysis of a Cradle Bracket |
| 41 |
Finite Element Analysis of LFDS Funnel |
| 42 |
Finite Element Analysis of Scissors for a Trailer System |
| 43 |
Finite Element Analysis of TTx Mounting Pedestal & Nose
Radom |
| 44 |
Finite Element Analysis of Conveyer System |
| 45 |
Finite Element Analysis of Piston Driven Shock Tube |
| 46 |
Finite Element Analysis of SF Complex System |
| 47 |
Finite Element Analysis of Transport Mechanism and
Optimization |
| 48 |
Finite Element Analysis of VDO Chamber |
| 49 |
Structural Analysis of Support Structure for Cyclone &
Moisture Trap |
| 50 |
Structural Analysis of Hypersonic Tube |
| 51 |
Structural Analysis of Pump Drive Line |
| 52 |
Structural Analysis of Air Filter |
| 53 |
Structural Analysis of Air Transport Rack |
| 54 |
Linear Static Analysis for Carriage-11436X (width 72") |
| 55 |
Static Analysis of Top Chamber VL-5B |
| 56 |
Static and Buckling Analysis of Quench Chamber |
| 57 |
Static & Buckling Analysis of Autoclave Chamber |
| 58 |
Finite Element modeling of BIW |
| 59 |
Finite Element Modeling of a V-Engine Block / Cylinder |
| 60 |
Finite Element Modeling of Plastic Components |
| 61 |
Linear Static Analysis of Chassis with Mast |
| 62 |
Finite Element Analysis of Container Platform |
| 63 |
Static Analysis of a Mirror |
| 64 |
Finite Element Analysis on Ante Chamber |
| 65 |
Redesign of Elevation Cylinder Mounting Bracket of EX- Tank |
| 66 |
Finite Element Analysis of Engine Block and Cylinder Head
Gasket Leakage |
| 67 |
Finite Element Analysis of caster ride-on(toy) |
| 68 |
Static Analysis of a Connector |
| 69 |
Finite Element Analysis of whiffletree arms and its support |
| 70 |
Finite Element Analysis of Infiltration Chamber |
| 71 |
Finite Element Analysis of Resin Chamber |
| 72 |
Structural Analysis of LFDS Funnel |
| 73 |
Weight Reduction Study on Axle of BVZI Wagon wheel |
| 74 |
Optimization of BG loco wheel for warpage reduction |
| 75 |
Damage Tolerance Evaluation of Gas Turbine Engine Fan Blade Out Containment Structures |
| 76 |
Surface Crack Growth Prediction Under Static/Cyclic Loads and Assessment of Life Prediction Computer Programs for Gas Turbine Components |
| 77 |
Study for Response Reduction in Motor |
| 78 |
Finite Element Analysis of Tx Cabinet |
| 79 |
Finite element analysis of Steam Turbine |
| 80 |
Structural Integrity Test on Robot- Mounted Camera |
| 81 |
Finite element analysis of ROPS and FOPS structure for dump truck cabin |
| 82 |
Structural Analysis of Fuel Monitoring Equipment |
| 83 |
Finite Element Modeling and Analysis of Bearing Fatigue Testing Equipment |
| 84 |
Finite Element Analysis of Twin Door Metallising Unit |
| 85 |
Finite Element Analysis of Casting |
| 86 |
Structural Analysis of Hermetically Sealed Unit |
| 87 |
Finite element analysis of A0117-ATR and A0119 - ATR |
| 88 |
Structural analysis of the Display console & workstation |
| 89 |
Structural analysis of the HAMSA NG Cabinets |
| 90 |
Finite Element Analysis of ATR Fixture |
| 91 |
Finite element analysis of Trailer Assembly |
| 92 |
Rotor dynamic analysis of Shaft Assembly |
| 93 |
Finite Element Modeling and Analysis of Spine |
| 94 |
Structural Analysis of the Universal Testing Machine Assembly |
| 95 |
Structural Analysis of CC, CO EEP, LC and SSC Cabinets |
| 96 |
Structural Analysis of Aircraft components |
| 97 |
Static Analysis of Cubical Oven |
| 98 |
Dynamic Response Analysis of Linear Friction Welding Machine |
| 99 |
Finite Element Analysis of Main Frame Structure with Boom Post Assembly |
| 100 |
Structural Analysis of A0234 Unit |
| 101 |
Structural Analysis of A0247 and A0223 Unit |
| Kinematic Analysis |
| 1 |
Kinematic Analysis of a Conveyer System |
| 2 |
Kinematic and Dynamic Simulation of an Excavator |
| 3 |
Mounting of Crane on Jet Deflector Crane Car and Stability
Calculations |
| 4 |
Kinematic Analysis of a Dunk Body |
| 5 |
Test Rig Simulation of Six Axis Machine |
| 6 |
Kaveri Engine (K10) CD Nozzle Kinematic Analyses for Design
Optimisation |
| 7 |
Kaveri Variable Guide Vane Mechanism / Analysis & Design
Optimisation |
| 8 |
Kinematic Analysis of Door Latch – Actuator Mechanism |
| 9 |
Kinematic and Dynamic Analysis of Four bar Mechanism for Lid |
| 10 |
Dynamic Analysis of Median Marker |
| 11 |
Kinematic Analysis of Hydraulic Boom Assembly |
| 12 |
Multi Body Dynamic Simulation of Tandem Bogie Suspension |
| Computational Fluid Dynamic Analysis |
| 1 |
Grid Generation and Conjugate Heat Transfer Analysis of
Combustor & Afterburner |
| 2 |
Computational Fluid Dynamic Analysis of 550 HP and 1400 HP
Torque Converters |
| 3 |
Study on Flow of Air and Mist in the Shop Floor |
| 4 |
Design and Optimization of Air filters |
| 5 |
Pilot Study for the Design & Development of a Thrust
Vectoring System for Jet Engine |
| 6 |
Conjugate Heat Transfer Analysis of High Pressure Turbine
and Low Pressure Turbine Disc Cavities |
| 7 |
Coupled Computational Fluid Dynamic and Heat Transfer
Analysis of Antenna Units and RF Modules dorsally mounted on an
Airborne Platform |
| 8 |
A 3D Conjugate Heat Transfer Analysis of the Kaveri High
Pressure Turbine Nozzle Guide Vane and Blade Using NUMECA
Software |
| 9 |
Computational Fluid Dynamic Analysis to Estimate the Effect
of Protrusion on Tail Fin |
| 10 |
3D Sectoral Conjugate Heat Transfer Analysis of HPT and LPT
Rims |
| 11 |
Computational Fluid Dynamic Analysis of a Methanol Reformer |
| 12 |
Computational Fluid Dynamic Analysis to Estimate the Effect
of Ram Air Scoops on Tail Rudder |
| 13 |
Thermal Analysis of Convection Cooled Chasis |
| 14 |
Conjugate Heat Transfer Analysis of C4 Engine Secondary Air
path with and without Instrumentation Tube |
| 15 |
Design and Development for Cooling System for Rotor box |
| 16 |
C4 Engine Conjugate Heat Transfer Analysis, Radiation &
Windage Studies |
| 17 |
Conjugate Heat Transfer Analysis of Fan Configuration &
Complete Secondary Air Path for M=0.3 |
| 18 |
Conjugate Heat Transfer Analysis of Power Turbine discs and
disc Cavities |
| 19 |
Computational Fluid Dynamic Analysis for Ventilation and
Defrost duct system |
| 20 |
Computational Fluid Dynamic Analysis on a Diesel Engine
Silencer |
| 21 |
Computational Fluid Dynamic Analysis of a Radiator Cap |
| 22 |
Computational Fluid Dynamic Study to develop an optimal flow
pattern on Bipolar Plates in Fuel Cells |
| 23 |
Computational Fluid Dynamic Analysis of Airflow through
Cascaded Cold Plate Scheme |
| 24 |
Computational Fluid Dynamic Analysis of Diesel Heating Plug |
| 25 |
Conjugate Heat Transfer Analysis of Secondary Air System of
Fan, HP & LP Spools for K9+ Engine |
| 26 |
Computational Fluid Dynamic Analysis of Flow Meter |
| 27 |
Computational Fluid Dynamic Analysis of Oil Filter |
| 28 |
Thermal Analysis of Plastic vessel for water purifier |
| 29 |
Computational Fluid Dynamic Analysis of the Gas Flow
Distribution of a U-Tube Heat Exchanger |
| 30 |
Computational Fluid Dynamic Analysis for Prediction of Plume
Trajectory |
| 31 |
Computational Fluid Dynamic Analysis for LFB function in VE
pump diesel engine component |
| 32 |
Computational Fluid Dynamic Analysis of Tail Fin with Rudder
and Nose region of an Aircraft |
| 33 |
Thermal Analysis of Plastic vessel. |
| 34 |
Technical Support for Design of Pneumatic Cannon |
| 35 |
Computational Fluid Dynamic Analysis of the Exhaust Duct of
a Dump Truck |
| 36 |
Cooling Concepts related to Gas Turbine Blades |
| 37 |
2D unsteady Computational Fluid Dynamics analysis of the Gear Pump |
| Thermal Analysis of Electronic Equipments (Using Icepack) |
|---|
| 1 |
Steady State and Transient Thermal Analysis of Asynchronous
Transfer Module Switch |
| 2 |
Computational Fluid Dynamics Analysis of Flight Level Radar
Container |
| 3 |
Thermal Analysis of Gun Control Unit Assembly |
| 4 |
Thermal Analysis of LWRWR and EWSC Unit |
| 5 |
Thermal Analysis of 5 Level Cabinet |
| 6 |
Computational Fluid Dynamic -Thermal Analysis of CDU |
| 7 |
Thermal Analysis of Power Amplifier Cabinet |
| 8 |
Computational Fluid Dynamic Analysis of Telephone Instrument |
| 9 |
Thermal Analysis of A0107 Air Transport Rack |
| 10 |
Thermal Analysis of LWRSPU Unit |
| 11 |
Thermal Analysis of Single display and Dual Display Units |
| 12 |
Thermal Analysis of Tx Cabinet |
| 13 |
Thermal Analysis of 5 Level Enclosure |
| 14 |
Thermal Analysis of Hermetically Sealed Unit |
| 15 |
Thermal Analysis of TBGA |
| 16 |
Thermal Analysis of CC, CO EEP, LC and SSC Cabinets |
| 17 |
Thermal Analysis of Platen |
| 18 |
Thermal Analysis of A0247 and A0223 Unit |
